Tel : +86 13729892225
Email : export@dtechelectronics.com
Categories
New Products
DTECH HDMI to MPO Adapter Cable 8K 4K HDMI over MPO Fiber Kit Connect an HDMI source to a remote display over an MPO fiber trunk. The DTECH Detachable 8K HDMI over MPO Fiber Kit uses separate SOURCE and DISPLAY leads that connect to the fiber trunk through MPO adapters. Route the trunk through conduit first, then attach the HDMI ends where the equipment is installed. more
DTECH IOT9024DI Industrial 4 Port Isolated RS485 Hub Expand one RS485 network into four independently isolated channels with the DTECH IOT9024DI. Supports data rates up to 5 Mbps, 5000 Vrms isolation, and DIN-rail mounting for industrial applications. more
DTECH Single Mode Duplex Fiber Optic Patch Cord Explore DTECH single-mode duplex fiber optic patch cords with LC/UPC connectors, low-loss connectivity and customizable lengths, connector options and OEM/ODM packaging. more
DTECH 1.25G Gigabit Module 20km BiDi SFP Optical Transceiver Fiber 0ptic Module Explore DTECH BiDi SFP optical transceivers for single-fiber bidirectional communication up to 20km. 1550nm/1310nm wavelength pairing, DDM monitoring, and OEM/ODM support. more
DTECH Industrial Ethernet Switch 5 8 Port Unmanaged Industrial Ethernet Switch for Industrial Automation Discover how the DTECH SW1000 Series industrial Ethernet switch supports PLC, industrial automation, security monitoring and edge network applications with DIN-rail installation, wide-voltage power input and fanless cooling. more
USB RS232 RS485 Blue-tooth Serial Adapter Wifi Wireless Transmitter Receiver Converter USB RS232 RS485 Blue-tooth Serial Adapter Wifi Wireless Transmitter Receiver Converter more
DTECH USB to RS232 Opto-Isolated Serial Cable Converter USB to RS232 Opto-Isolated Serial Cable Converter more
DETCH USB to TPUNB wireless serial data transceiver converter with suction cup antenna This product is a long-range wireless data transceiver, employing domestically produced TPUNB spread spectrum modulation for high-performance, high-reliability, high-stability, and low-power wireless data transmission. more
Industrial Ethernet Switch Manufacturer 8 Port Gigabit DIN Rail Switch DTECH DTECH industrial Ethernet switches provide reliable network connectivity for factory automation, transportation, and industrial IoT applications. Managed, unmanaged, PoE and Gigabit Ethernet switches available. more
RS232 to TTL Serial Converter Adapter DTECH IOT9005 RS232 to TTL Serial Converter Adapter DTECH IOT9005 more
Industrial Class Management Ethernet Switch 4 8 16 Ports industrial network switch manufacturer Industrial Ethernet switches are used to build reliable and efficient industrial networks, supporting real-time data transmission and device interconnection. more
Type C A Male A Male full function Fiber Cable Full-function Fiber Optic Data Type C A Male A Male full function Fiber Cable Full-function Fiber Optic Data more
Connect an HDMI source to a remote display over an MPO fiber trunk. The DTECH Detachable 8K HDMI over MPO Fiber Kit uses separate SOURCE and DISPLAY leads that connect to the fiber trunk through MPO adapters. Route the trunk through conduit first, then attach the HDMI ends where the equipment is installed.
Brand:
DTECHDTECH HDMI to MPO Adapter Cable 8K 4K HDMI over MPO Fiber Kit
Connect an HDMI source to a remote display over an MPO fiber trunk. The DTECH Detachable 8K HDMI over MPO Fiber Kit uses separate SOURCE and DISPLAY leads that connect to the fiber trunk through MPO adapters. Route the trunk through conduit first, then attach the HDMI ends where the equipment is installed.
Request a Quote · Check Project Compatibility
This kit is intended for AV installations where the source and display are in different rooms, racks, or equipment zones. The detachable design lets installers route the MPO trunk without pulling the HDMI plugs through the pathway. The display-side lead has a USB-A connection. Confirm its power requirements when planning the installation.
|
Feature |
Product information |
|
Signal path |
HDMI source to HDMI display over an MPO fiber trunk |
|
Connection design |
Detachable SOURCE and DISPLAY leads with inline MPO adapters |
|
Advertised video capability |
Up to 8K at 60 Hz, with Dynamic HDR support on compatible equipment |
|
Advertised HDMI bandwidth |
Up to 48 Gbps |
|
Advertised MPO trunk reach |
Up to 500 m, subject to configuration |
|
Display-side connection |
HDMI plug with USB-A lead |
Confirm the supported video mode at your required distance before specifying the kit. Link performance depends on the source and display, the selected fiber configuration, and the complete installed path.
HDMI source → SOURCE lead → MPO adapter → MPO fiber trunk → MPO adapter → DISPLAY lead → HDMI display
Use the SOURCE lead at the playback or output device and the DISPLAY lead at the receiving display. Before ordering, confirm the trunk length, fiber type, MPO pin configuration and polarity, and the display-side USB power requirements.

· Conference and exhibition AV — Connect presentation equipment in an AV rack to a remote display.
· Digital signage — Link a media player to a display across a venue or building.
· Production and live event AV — Route an HDMI feed from equipment to a remote monitoring position.
· Home theater — Connect equipment in a separate cabinet or room to a display over a conduit route.
Yes. The HDMI leads detach at the MPO connections, so the trunk can be routed first. Confirm connector clearance, bend radius, and pull limits for the selected trunk before installation.
The product literature lists up to 8K at 60 Hz and a trunk reach of up to 500 m. Ask DTECH to confirm your target video mode at the required distance with your source, display, and fiber path.
Have DTECH verify the trunk’s fiber type, fiber count, pin configuration, polarity, length, and any intermediate connections against the kit configuration.
Connect the lead marked DISPLAY to the display and the lead marked SOURCE to the HDMI source. The USB-A lead is on the display side.
Share your required cable length, source and display models, target resolution and refresh rate, and whether you plan to use existing MPO cabling. DTECH can use those details to confirm the configuration for your project.
© Copyright: 2026 Guangzhou Dtech Electronics Technology Co.,Ltd. All Rights Reserved.